Hi Luis, 

I tried printing manually using PostScript Custom Paper Size. And it looks like it supports large paper sizes. However, in Docuflow, the maximum dimensions are 327.5x327.5cm

Hi Majeed Zoabi!

Do you print manually using Windows printer forms or do you print manually using PostScript Custom Paper Size? Docuflow uses Windows printer forms, and it seems that even though the size is manually specified correctly on those forms, the printer always reverts to A4. 

We will look into this matter and will update the forum.

Hello,

This issue was described here:

https://goto.archi/forum/docuflow/docuflow-struggles-with-lengths-greater-than-327.5cm/?p=1

I'm still not why there is a limitation when you can manually print large sizes.

Thanks for the answer, I can handle it manually somehow. Unfortunately, this is time consuming.
Good luck working on solving the problem :)

That is currently not possible due to limitations on windows printer form sizes. Please read here: https://goto.archi/forum/docuflow/large-sheet-printing-error/?p=1

In alternative very large sheet sizes, must be printed manually. Please use the Revir print dialog, and in the Bullzip PDF driver choose a custom postcript size with 4520mm x 3096mm.

Hello.
I have a specific project where I need a very large pdf page. When I save the page size 4520mm x 3096mm it gets a blank PDF which is 4kb. All smaller sheets print without problem. Is there any solution to this problem.
I am using version 4.19.0.0 and revit 2020.

Greetings.