Toggle Nav
 

Docuflow Forum Page 5 forum

 
 
  • 1
    answers
    2155
    views
    asked by antonio alessi 12 May 2020

    Hi everyone

    I'd like to know if it's possible to add delimiter in advanced naming or only parameters are allowed.

    I'd like to compose the following maning rules:

    <SHARED PARAMETER> - <SHARED PARAMETER> - <SHARED PARAMETER> - <SHEET NUMBER>

    Thank you in advance

    updated 4 years ago | antonio alessi
  • 0
    answers
    2134
    views
    asked by Luis Santos 12 May 2020

    Version 4.8 is now released.


    Improvementes / fixes:

    • Support sheets with more than one titleblock: a larger titleblock and a small titleblock. Docuflow will assume that the print area is to be framed by the largest titleblock in the sheet. Previously Docuflow only supported sheets with a single titleblock.
    updated 4 years ago | Luis Santos
  • 1
    answers
    2128
    views
    asked by Alex Pashchuk 08 May 2020

    The name computer in floating license doesnt mine

    updated 4 years ago | Alex Pashchuk
  • 4
    answers
    2172
    views
    asked by Toni Johansson 08 May 2020

    Docuflow suddently started totally freezing when printing pdf and only way to stop that is closing program. Same issue apears with bullzip and pdf24.
    Im using Revit 2018.3.3 and Docuflow 4.6

    updated 4 years ago | Toni Johansson
  • 2
    answers
    2142
    views
    asked by Majeed Zoabi 07 May 2020

     

    Hello,


    I want to remove custom page sizes which were generated automatically by ducoflow.


    How am I supposed to do that?

     

    Docuflow page sizes

    updated 4 years ago | Majeed Zoabi
  • 3
    answers
    2131
    views
    asked by Daniel Zuppiger 22 Apr 2020
    updated 4 years ago | Daniel Zuppiger
  • 7
    answers
    2151
    views
    asked by Marc Zander 22 Apr 2020

    How to prevent Bullzip from Upgrade?


    Everry time we start Revit we have to downgrade Bullzip.


    Also in Version 4.6.



    updated 4 years ago | Marc Zander
  • 2
    answers
    2171
    views
    asked by danil poletavkin 21 Apr 2020

    hi, how to remove license from computer? program is already uninstalled

    updated 4 years ago | danil poletavkin
  • 0
    answers
    2150
    views
    asked by Luis Santos 20 Apr 2020

    Version 4.6 is now released.


    Improvementes / fixes:

    • The selected sheets can now be sorted by clicking the sheet number or sheet name columns.
    • The sheet set creation as got minor improvements.
    • The Cancel button in the main dialog has ben renamed to Close to avoid misunnderstandings by the user.
    updated 4 years ago | Luis Santos
  • 1
    answers
    2134
    views
    asked by Jakub Pawlak 20 Apr 2020

    I downloaded the Docuflow 4.1 trial version to test it and installed it on revit 2015.


    There is an icon on the revit ribbon but it doesn't seems to work. I can't even open the app window.

    updated 4 years ago | Jakub Pawlak
  • 3
    answers
    2148
    views
    asked by Anders Lunde Jacobsen 17 Apr 2020

    Dear Archigrafix

    We have now used DocuFlow for a few weeks and really like the simple and intuitive solution you have provided. We do, however, have some feedback we'd like to share with you so that you can - hopefully - make this add-on even better in the coming releases.


    1) In the main window, the button next to "Publish" is named "Cancel" which does not seem to be intuitive. I have coworkers opening the main window, creating a drawing set with a lot of changes, they then click: "Save" in the top right but then "Cancel" to close the window if they do not want to print. This makes them worry if their changes have been saved or not.

    A better name for that button would be "Close".


    2) In the main window, "sorting" options are not available for the selected "Set to publish"-section, but only for the full "Sheet's Available"-section. For large projects it becomes incredibly hard to make sure that all drawings are present since they are added to the "Set" in a seemingly random order.


    3) Furthermore, in the "Set to publish"-section you have added buttons to move individual sheets "Up" or "Down" by clicking a button - but the final sorting is not saved when a sheet is moved, and has to be done every time we open the main window.


    4) Furthermore, in the "Set to publish"-section, we have the opportunity to create a "New" and name it, which is great. But when doing that the dropdown resets to "- Please Select -" and all drawings disappear and we have to click the dropdown and select the set we just created to see the sheets added again.


    5) In general, the dropdowns only "drop down" when clicking the tiny arrow next to the dropdown - it is standard in a lot of programs that clicking the text in a dropdown yields the same behaviour as clicking the arrow.


    6) In the "Select Folder" dialogue, you have added an option to "Create new folder" which is great, but when you name a folder in this dialogue, it simply shows up as "New Folder" in the file tree structure and in the "Location"-section likewise. If you close the "Select Folder" dialogue and browse the file tree again, the folder is correctly named and created - so it is seemingly to do with a "refresh" of the file tree after having created the folder.

    Once again, most of these are minor / quality of life improvements - but they would in our opinion improve your program a lot!

    Sincerely

    Rasmus Petersen / P+P arkitekter a/s

    updated 4 years ago | Anders Lunde Jacobsen
  • 1
    answers
    2136
    views
    asked by Gerrit van Es 17 Apr 2020

    At the download page still see 4.4..........

    updated 4 years ago | Gerrit van Es
  • 0
    answers
    2158
    views
    asked by Luis Santos 17 Apr 2020

    Version 4.5 of Docuflow was released.


    Improvements / fixes:

     

    • Added a button to cancel the print if the PDF exists and the user do not want to close it for any reason.
    • Improved the compatibility with PDF24.
    updated 4 years ago | Luis Santos
  • 1
    answers
    2182
    views
    asked by Gerrit van Es 17 Apr 2020

    When trying to use docuflow i get an error message:


    "Docuflow cannot save......please close the file and try again"....


    After this message NOTHING works anymore and i have to force close revit (via taskmanager) in order to use revit and docuflow again.


    Then docuflow works again for a short time and then theres the error message again.

    updated 4 years ago | Gerrit van Es
  • 1
    answers
    2159
    views
    asked by Eija Katajamaki 14 Apr 2020

    Hi,

    win10/ 3000x2000 / 200dpi

    4.1 Window resizing works OK, can see the publish button


    4.4 window doesn't get correct size and cancel/publish buttons are hidden


    regards

    updated 4 years ago | Eija Katajamaki
  • 1
    answers
    2153
    views
    asked by Kim Zammit 26 Mar 2020

    With the latest update of Douflow 4.3 the printer becomes non-responsive after the first sheet printed using PDF24. 

    BullZip is also adding a thin red "trial mode - click here for details" water mark to the left edge of sheets. 

    updated 4 years ago | Kim Zammit
  • 2
    answers
    2247
    views
    asked by Luis Santos 24 Mar 2020

    Version 4.3 Release

     

    Impriovements:


    Minor correction related with printing to a single file with PDF24 or colour with BullZip that made the program halt.

     

    Download link:
    http://www.archigrafix.com/media/downloads/Docuflow_install_4.3.exe

    updated 4 years ago | Luis Santos
  • 7
    answers
    2229
    views
    asked by Majeed Zoabi 24 Mar 2020

    Docuflow 4.2 stuck on first sheet (Spooling stage).


    Printer: Bullzip


    Mode: export all sheets into a single file


    NOTE: Docuflow seems to work fine when exporting single PDF. but when exporting into a single file, it gets stuck and requires me to end revit in task maanger

    updated 4 years ago | Majeed Zoabi
  • 4
    answers
    2135
    views
    asked by Marc Zander 24 Mar 2020

    tried docuflow 4.2 with pdf24, but docuflow (and revit) crashes always after the first sheet...


    uninstall serval times now, but docuflow still crash every time.

    updated 4 years ago | Marc Zander
  • 0
    answers
    2137
    views
    asked by Luis Santos 08 Mar 2020

    Version 4.2 was released!

     

    New features:


    Added support to PDF24. We decided to expand the choice of PDF drivers to Docuflow. PDF24 will togeather with BullZip and BioPDF satisfy all the needs from our customers in generating PDFs. PDF 24 is a German developed software that can be installed freely in all computers. PDF 24 does not have the limits of the trial versions of BullZip and BioPDF. For instance PDF24 will allow to print in very high resolution, for instance 600 or 1200 dpi. This new driver comes pre-installed with Docuflow 4.2.


    Fixes:


    Corrected a minor bug that halted Docuflow if no PDF driver was not installed or selected.

    updated 4 years ago | Luis Santos

Items 81 to 100 of 163 total

Show per page