Toggle Nav
 

Docuflow Forum Page 9 forum

 
 
  • 0
    answers
    3861
    views
    asked by Luis Santos 05 Jan 2019

    The early versions of PDF (for instance 1.1) may not encode the text properly.


    Please check the compatibility settings in the PDF tab, and test a higher setting, for instance PDF 1.7 .

     

    By default Docuflow has PDF 1.5.

     

    updated 6 years ago | Luis Santos
  • 0
    answers
    3904
    views
    asked by Luis Santos 05 Jan 2019

    Prior to version 2.7 Docuflow there can be a situation where Docuflow will not successfully pass the print instructions to Revit.

     

    There are 2 steps to check:

     1 - Upgrade to Docuflow 2.8 if you have an older verison. This version has an improvement that solves that error.

     

    2- Ensure that the Revit selected default print set is not empty (without sheets)
    • Open the print dialog
    • In Print range click the button select.
    • If the set has no selected sheets, delete that set. The alternative is to select the set <in-session>.
    • Click OK
    • Click close to close the Revit Print Dialog
    • Use Docuflow

     


    This last error will be corrected in version 2.9

    updated 6 years ago | Luis Santos
  • 1
    answers
    3964
    views
    asked by Luis Santos 17 Dec 2018

    Docuflow has the following requirements in order to print PDFs in the right paper size:

    Always use the latest version of Docuflow from our download page.


    The installed version of Bullzip must be 11.1.0.2600. Newer versions are not compatible.


    The user must have administration permissions to the Bullzip printer. This is enabled in the Devices and Printers, Bullzip PDF Printer Properties, Security tab: enable Manage this printer and Manage documents for your user.  


    updated 5 years ago | Luis Santos
  • 9
    answers
    3887
    views
    asked by Carsten Kodat 13 Dec 2018

    Is the Trial Version limited for sheet size?

    I only get A4 format for the test.

    updated 6 years ago | Carsten Kodat
  • 1
    answers
    3907
    views
    asked by Glenn Brodersen 26 Nov 2018


    Thank you for a good program. I have a little wish. Can you create an option to create my own delimiter, or alternate make one with spaces front and back dash.


    Ex. ' - ' Dash


    Document name - Sheet nam

    updated 6 years ago | Glenn Brodersen
  • 5
    answers
    3867
    views
    asked by Tatyana Nudnaya 23 Oct 2018

    Docuflow v2.0 - does not work in Revit 2018, just did not start.
    Docuflow v1.9 worked correctly.
    What's the matter?

    updated 6 years ago | Tatyana Nudnaya

Items 161 to 166 of 166 total

Show per page